Stainless Steel Frame Cramp With Dowel Holes Slotted Upstand
Pieces:
| Product Name | Qty |
|---|---|
| 50mm ST/ST DOWEL CRAMP 7mm HOLES | 250 |
| 75mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 450 |
| 100mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 0 |
| 125mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 322 |
| 150mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 334 |
| 175mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 271 |
| 200mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 131 |
| 225mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 0 |
| 250mm ST/ST DOWEL CRAMP 7mm HOLES & SLOT | 544.5 |
Frame Cramp Dowel Hole Wall Ties (V7H)
This product is the same as our 'Frame Cramp Wall Ties' but it is supplied with 3 x 6.5mm holes to be fixed with dowel bars.
The Frame Cramp Dowel Hole Wall Ties are used to restrain stone cladding and coping stones. Once the ties are in place they stop movement in a sideways direction of a wall and another element.
Key points:
3 Holes for dowels: 6.5mm
Normally used with 6mm dowels see related product
6.5mm Slot in the upstand
Type 2 Wall Tie
Design – Frame cramp with 3 x 6.5mm holes in the projection for a dowel bar. Used to restrain stone cladding and coping stones.
Material – Manufactured from grade 304 stainless steel.
Behaviour in relation to fire – Non combustible (as defined in the national Building Regulations).
Durability – Excellent corrosion resistance and a service life of not less than 60 years.
Specification – Available for specification on the NBS Source platform.
Dowels supplied separately See related products
