Stainless Steel Frame Cramp With Dowel Holes, Drip and Slotted Upstand

Frame Cramp Dowel Hole Wall Ties (V7H)

This product is the same as our 'Frame Cramp Wall Ties' but it is supplied with 3 x 6.5mm holes to be fixed with dowel bars.

The Frame Cramp Dowel Hole Wall Ties are used to restrain stone cladding and coping stones. Once the ties are in place they stop movement in a sideways direction of a wall and another element.

Key points:

• 3 Holes for dowels: 6.5mm 
• Normally used with 6mm dowels see related product.
• 5mm Slot in the upstand
• Type 2 Wall Tie

Design – Frame cramp supplied with a drip to prevent moisture crossing the cavity. Drip position 90mm from safety end as standard. 3 x 6.5mm holes in the projection and a 6.5mm slot in the upstand

Material – Manufactured from grade 304 stainless steel.

Behavior in relation to fire – Non combustible (as defined in the national Building Regulations).

Durability – Excellent corrosion resistance and a service life of not less than 60 years.

Specification – Available for specification on the NBS Source platform.