BOX BEAD DOUBLE SOCKET

A carefully crafted a bead for professional plasterers. The Box Bead can be inserted into single and double gauge openings in plaster board. The use of the Box Bead in wet ‘rough’ coat plaster enables a clean cut opening to be formed around the electrical backing boxes. This skimming bead actively seals a reinforced edge around the double and single apertures when plastering. A high-end finish is achieved at little cost to you.

The Box Bead provides the following benefits:

IP54 protection upon application

Optimised plastering performance – It’s a fast solution to the fast game of plastering. Plasterers or tackers can fix it to the wall in seconds. The bead’s 3mm ridge correlates to the plaster coat thickness, which accurately guides the plasterer to trim and remove the overflow of plaster, thus leaving a clean, clear, crisp edge after plastering. Applied to drywall skim, rough coat render and re-furbishment works.

Easy Locator – The Box Bead’s specialized design of internal flanges fit between the grommets and conduit entrances in the standard electrical backing box. The bead frames, without hindering, the electrical backing box. The Box Bead is an easy locator for electricians. No hammering is required to remove the back fill of plaster within the electrical backing boxes. Easy and fast, the Box Bead brings efficiency for electricians during the second fix.

Quality every time – Application of putty and sanding down is no longer required in this area of work, seeing as the Box Bead actively seals plaster around the aperture. You accomplish a high-end professional finish every time.

Safe manual handling – Blades or hammers are no longer required to remove the excess plaster from the backing box after plastering. The smooth curved corners of the bead enable the plasterer to run his finger around the bead’s internal ridge, within seconds, to remove the wet excess plaster.

Dust Free – The professional finish around the backing boxes also reduces exposure to dust particles as the need for sanding down infill is eradicated. Eyes and respiratory system are therefore saved from excessive dust exposure, which can be a cause of irritation and other related health problems.

Safe build ability – The V2 (fire resistant) Box Bead is free from sharp edges. No lacerations to the hands when removing the excess wet plaster from around the Box Bead opening.

No Wastage – No rubbish or dust is generated from the Box Bead due to the ‘making good’ phase being eradicated. This enables decorators to start painting after the plaster is cured. Improving your EP&L figures and a clean site is a safe site.

European Community Design Numbers:

001676743 – 0001, 001676743 – 0002, 001676743 – 0003 & 001676743 – 0004