TEXTURE, RENDER, TANKING, MASONRY PAINT SPRAY KIT COMP 240V

Our Spray kit is supplied with a 10cfm compressor, Texasprayer, 30Mtrs of hose and a Hiflo connector to connect the sprayer unit to the hose. The Texasprayer contains 3 nozzles in the kit 4, 6 & 8mm

The gravity feed spray gun with 5 ltr hopper is a versatile spray gun for high build & cementitious coatings, Cullamix, Tyrolean, textured renders, Sandtex, masonry paints, Artex, textured coatings, Monolastic elastomeric textures, Vandex tanking & waterproofing coatings. The Texaspray unit is easy to use & clean.

Specification

• Texaspray hopper spray gun
• Hopper 5 ltr capacity
• Weight 0.7kg
• Nozzles 4mm, 6mm & 8mm
• Output 60m²/hr
• Air required 150 ltr/min @ 3 bar

• 2hp compressor
• Power 1.1kw
• Air tank 30 ltr
• Air output 280 ltr/min
• Max pressure 10 bar
• Voltage 110v only
• Weight 41Kg

Due to the power compressors pull on start up it is advisable to plug these directly into the mains and not run on an extension lead.

If you have to use an extension lead, please ensure the cable is a minimum of 2.5mm and not longer than 14Mtrs (see related product for extension leads which are suitable)

This Kit only available for collection or delivery to the Bristol or Bath area

Deliveries outside these areas please contact us @ sales@ellisbuildingproducts.co.uk