P3V CUP MASKS (10)

Premium cupped FFP3 respirator with foam inner seal and exhalation valve to the front. (APF 20)

• Comfortable, lightweight off-the-face design provides more space for lower breathing resistance
• Exhalation valve reduces heat build up
• 4 point colour coded headstraps for quick identification and a secure fit for many different head shapes and sizes.
• Soft inner foam seal improves the face seal and provides additional comfort for the user over extended periods of use.

Respiratory protection is only effective if correctly selected, fitted and worn for the complete period of exposure to hazards – Read ALL instructions and warnings carefully before use.

1. Hold the mask in hand with the metal nose-piece up. Allow headband to hang freely and gently open mask.
2. Position the mask under the chin covering mouth and nose and pull the headband over the head and position behind head.
3. Press soft metal nose-piece to conform snugly around the nose.
4. To check fit, cup both hands over the mask and exhale vigorously. If air flows around nose, tighten the nose-piece. If air leaks around the edge, reposition the headband for better fit. Retest the seal and repeat the procedure until the mask is sealed properly.

The length of time this respirator can be used depends on contaminants present but should not exceed one shift. The respirator should be replaced sooner if breathing becomes difficult or if the user notes any irritation, taste or smell.

This mask meets the requirements of EN149:2001 FFP3 and offers protection against non-toxic and and low-to-average toxicity and high toxicity solid and liquid aerosols (e.g. oil- mists) in concentrations up to 50 x MAC/OEL/TLV or 20 x APF.

For more information please read the data sheet